Product Image
Artificial Stone Resin/
Overview
ALITA 8685 Unsaturated Polyester Resin
Category：Artificial Stone ResinCode：ALITA 8685
Features
ALITA 8685 is an unsaturated polyester resin based on phthalic anhydride. It features moderate viscosity and reactivity.
- Performance: Excellent color matching capabilities, high strength, and outstanding toughness.
- Applications: Optimized for the production of artificial granite, artificial marble, and composite stone products.
Specifications
| Inspection Item | Standard Range | Unit | Test Method |
|---|---|---|---|
| Appearance | Light Cyan Transparent Liquid | -- | -- |
| Acid Value | 18 - 24 | mgKOH/g | GB/T 2895-2008 |
| Viscosity (25℃) | 0.5 - 0.9 | Pa.s | GB/T 7193-2008 |
| Solid Content | 64 - 71 | % | GB/T 7193-2008 |
| Thermal Stability (80°C) | ≥ 24 | h | GB/T 7193-2008 |
| Gel Time (25℃) | 5 - 10 | min | GB/T 7193-2008 |
Note: Gel Time (GT) test system: Accelerator (0.6% Cobalt Naphthenate): 2%; Catalyst (Nouryon M-50): 2%.
Properties
| Inspection Item | Typical Value | Unit | Test Method |
|---|---|---|---|
| Appearance | Defect-free casting | -- | -- |
| Barcol Hardness | 42 | -- | GB/T 3854-2005 |
| Heat Distortion Temp | 55 | ℃ | GB/T 1634-2004 |
| Elongation at Break | 5.5 | % | GB/T 2567-2008 |
| Tensile Strength | 60 | MPa | GB/T 2567-2008 |
| Tensile Modulus | 3100 | MPa | GB/T 2567-2008 |
| Flexural Strength | 110 | MPa | GB/T 2567-2008 |
| Flexural Modulus | 3200 | MPa | GB/T 2567-2008 |
Usage Instructions
1. Composition: ALITA 8685 resin contains wax, but contains no accelerator or thixotropic agent.
2. Processing: In the production process, cutting and polishing must only be performed after the resin is fully cured.
3. Post-curing: To obtain optimal product performance, post-curing at a temperature of 60-70℃ for no less than 3 hours is recommended.
4. Filler management: Fillers should be prevented from absorbing moisture. High filler moisture content will seriously affect product curing, leading to decreased physical properties.
Storage & Handling
- Safety Protection: This resin contains ingredients that may be harmful if handled improperly. Avoid contact with skin and eyes; wear necessary protective equipment and clothing during operation.
- Storage Temperature: It is strongly recommended to store all materials in a stable temperature environment below 25℃ (77℉). Keep away from direct sunlight, steam pipes, and other heat sources.
- Sealing & Moisture: Strictly prohibit outdoor storage to prevent moisture contamination. Keep sealed to prevent moisture absorption and monomer loss.
- Inventory Rotation: Follow the "First-In-First-Out" principle.