Safety Data Sheet
Material Safety Data Sheet - Unsaturated Polyester Resin Safety Technical Specification
* Prepared according to the UN GHS (Globally Harmonized System) Rev. 10
1. Product Identification
Product Name
Unsaturated Polyester Resin
English Name
Unsaturated Polyester Resin
Recommended Uses
Composite manufacturing, hand lay-up, pultrusion, molding, etc.
Restrictions on Use
Consult professionals for non-industrial uses
2. GHS Hazard Classification
Signal Word: Danger
Hazard Statements
3. Precautionary Statements
Prevention Rules
- •Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- •Keep container tightly closed. Take action to prevent static discharges.
- •Do not breathe dust/fume/gas/mist/vapors/spray.
- •Wash hands and other exposed areas thoroughly after handling.
- •Use only outdoors or in a well-ventilated area.
- •Wear protective gloves/protective clothing/eye protection/face protection.
Action / Response
- •IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- •IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- •IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- •If you feel unwell, seek medical advice/attention immediately.
4. First Aid Measures
Eye Contact
Flush immediately with plenty of water for at least 15 minutes. Get medical help if feeling unwell.
Skin Contact
Remove contaminated clothing immediately. Wash skin with plenty of soap and water. Get medical help if feeling unwell.
Inhalation
Remove patient to fresh air immediately and keep comfortable for breathing. If breathing is difficult, give oxygen. If breathing stops, perform CPR. Seek immediate medical attention.
Ingestion
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or poison control center immediately.
Important Note
If the substance is ingested or inhaled, do not perform mouth-to-mouth resuscitation. Ensure medical personnel are aware of the product's hazard characteristics and take self-protection measures.
5-15. Other Core Safety Indices
Fire-Fighting Measures
Dry chemical, CO2. Avoid strong water jets.
Physical Properties
Transparent viscous liquid, flash point 35.5°C, insoluble in water.
Transport Info
UN No. 3082, Class 9 DG, Packing Group III.
Disposal
Hazardous Waste HW13. Must be incinerated by qualified entities.
For more detailed 16-point standard information, please refer to the printed version or full PDF MSDS document.
16. Other Information
Preparation Date
January 2024
Version
1.0
Revision Date
January 2024
References
- • UN GHS System Rev. 10
- • GB/T 16483-2008 SDS Content and Order
- • GB 30000 Series Standards
Disclaimer
The format of this SDS meets the requirements of UN GHS Rev 10. Information herein is based on our current knowledge. Users should assess its suitability for their purposes. We do not assume liability for damage caused by product handling, storage, or use. Please read product labels and tech docs carefully.